Pyronix EURO 76 - SYSTEM TESTING PROCEDURES; Walk Test; Walk Test Individual Zones; Siren Test

22
EURO 76 User Guide
Press b or d to scroll through the different
telephone numbers. Press f.
SMS Numbers
[01]
Enter the mobile number. Press f.
Press b or d to enable or disable the
number. Press f.
Mobile No. _
WALK TEST
The ‘Walk Test’ function allows the testing of all programmed zones on the alarm system.
Press b or h to scroll to ‘WALK TEST’. Press
f.
WALK TEST?
Select which level/area to walk test. Press f to
walk test all zones or press the h to walk test an
individual zone.
Please note: Only select one area to walk test at
a time.
Walk Test Areas
[01ABCD]
Walk test the zones scrolling on the display. After
all zones have been walk tested successfully ‘Walk
Test Completed’ will be displayed.
Walk Test
Input 01
Walk Test Individual Zones
Press b or d to scroll through the different
zones and press f to walk test that zone.
Walk Test Input
[01]
SIREN TEST
This function is used to test the siren and strobe outputs.
Press b or h to scroll to ‘SIREN TEST’. Press
f.
SIREN TEST?