21
EURO 76 User Guide
Press f to view the password again. Press h
to move to the next menu option.
View App
Password Key?
Rather than inputting the 32 character high security
password into the App, you can send the password
to a mobile phone and copy and paste it from the
text.
Press f to enter a mobile phone number*.
Send Password
Key in a text
Press b or d to enable or disable the polling
to the cloud at all times. Press f.
Please note: ‘Yes’ is recommended.
Alwys Poll Cloud
No [0]
*Please note: This function only available when using 3rd Party SIM cards only.
The password key is sent to your mobile phone as SMS message. UK numbers can be
entered with or without an international dialling code (e.g. +44).
If you need to enter an international dialling code to send the key to a foreign SIM card, use
the a key to enter the ‘+’ symbol.
MODULE SET UP
The type of module installed in your alarm system will determine which menu is shown here. This
menu is used to program the module so that it can send and receive data whether that be via
router or mobile data.
The connection of the module would typically be set up by the engineer on installation and if that
has been done it is not recommended that the existing programming in this menu be changed.
Please refer to the ‘Communications Guide’ for more details on this menu.
SMS PHONEBOOK
If SMS text is programmed, there can be up to 10 mobile numbers also programmed which can
be changed in this function. If “do not use” is shown on the display of a number, then a telephone
number already exists that is communicating to an Alarm Receiving Centre (this can only be
changed by your engineer).
Press b or h to scroll to ‘SMS
PHONEBOOK’. Press f.
SMS PHONEBOOK
To Next Page
Loading...
