26
EURO 76 User Guide
BASIC CONTROLS
Connecting to the Panel
1. 2. 3. 4.
Select the intruder system from the
main screen of HomeControl2.0 that
you wish to connect to.
Enter your ‘User code’ and ‘App
password’.
To save the user code and app
password, toggle the sliders so that
they are green and then tap ‘Login’.
HomeControl2.0 is now connected
to the system.
Please note: Whilst you are connected to the panel via HomeControl2.0, you will not
receive notifications. To disconnect, press < in the top left corner of the system controls
screen.
Biometric Authorisation
The next time the system is selected from the main screen, HomeControl2.0
will ask whether the user would like to enable facial or fingerprint recognition;
depending on the smart device capabilities.
To Next Page
Loading...
