PCX 256 USER MANUAL
RINS867-2 Page: 19
3.2.1 Omitting Open Inputs
If any inputs are open during the arming procedure, the following be displayed:
D
C
B
A
Arm with Fault?
Input 002
Tag
,/+.
JKL
ABC
MNO
DEF
PQRS
GHI
TUV
WXYZ
SPACE
1. Press the key, the system will then arm with the shown input(s) omitted.
3.3 Hold Up Alarm via The Keypad
The PCX LCD keypad can be used to produce a Hold Up alarm if enabled by the engineer. If this is
enabled, you can produce a Hold Up Alarm as follows:
1. Press the ! and & keys at the same time:
D
C
B
A
PCX 256.v5.e
Time 11.09 c
Tag
,/+.
JKL
ABC
MNO
DEF
PQRS
GHI
TUV
WXYZ
SPACE
2. An alarm will be activated. To disarm the Hold Up alarm, enter your user code (default: 1234)
or present a card/tag. The following will be displayed:
To Next Page
Loading...
Need help?
General
