PCX 256 USER MANUAL
RINS867-2 Page: 7
1.3 The External Reader (PCX- PROX/EXT)
POWER LED
This indicates that the reader has been found on the data bus,
and power is present. This will extinguish after a couple of
seconds.
RED LED
This can be programmed to follow an output (For example
you may want the output to illuminate when a partition is
armed). Contact your engineer for more information
The prox tags that are used with the PCX-PROX/INT and PCX-PROX/EXT are shown below:
These can be ordered as a pack of 5 (PCX-PTAG)
To Next Page
Loading...
