PCX 256 USER MANUAL
Page: 24 RINS867-2
Ø Enter ‘1’ = Disarm Only
Ø Enter ‘2’ = Arm Only
Ø Enter ‘3’ = None (You may just want the code to access the manager menu only)
Ø Press the key.
9. Flexi-Arm: If this option is selected as ‘Yes’ – then you can select which partitions you would
like to arm from the keypad. If this option is selected as ‘No’ (useful for cards/tags) then the
system will automatically arm the partitions that user has been assigned for.
Ø Enter ‘0’ = No
Ø Enter ‘1’ = Yes
Ø Press the key.
NOTE: If a PCX-ACCESS system is installed then you will get “S/Part Access” on the screen, here
you can enter what codes/tags you can have linked with the access system, all you need to do is
enter the device number (address) and press . You may have more than one.
10. User Name: Enter the user name using the following keys:
space0
Press the relevant key the appropriate number of times – e.g. for the letter ‘k’ press the % key
twice, or for the letter ‘s’ press the & key four times.
In addition, the ¤ ¦ § © keys are used as follows:
¤ = make the character into a capital
¦ = move cursor left
§ = clears cursor / adds a space
© = moves cursor right
Once completed, press the key and select another user, or to exit, press the key. ‘Change
User Codes’ will be displayed, press the key.
11. Change Master Manager Code: To change the manager code, simply enter a new code, and
repeat steps 6 to 10.
12. When ‘Change Master Manager Code’ is displayed, press the key, you will be returned to
the Master Manager Menu.
To Next Page
Loading...
Need help?
General
