PCX 46 Programming Reference
Page: 7
Delete Devices
Already learnt inputs may be deleted from this menu.
Delete All
Enter Code
To delete all wireless input devices enter ‘2000’ (this is the PCX 46 Security Code). “Please wait” will
be displayed while the PCX 46 deletes ALL the wireless devices learnt on the inputs.
Choose Input to Delete
This option allows you to delete only a specific wireless device learnt to an input. Any inputs that
display ‘learnt’ can be deleted. “Please wait” will be displayed while the PCX 46 deletes the wireless
device. Return to this process to delete more devices.
5.3.2 Learn Bells?
Learn Devices
Entering this menu allows you to start learning wireless bells onto the system
Select Bell
Use this menu to choose which bell on the system you wish to learn. ‘Learnt’ will be displayed if a bell
is already learnt, or ‘Available’ will be displayed if not.
Select Bell
Learning…
1) Open the bell
2) Plug the battery connector into the battery terminal.
3) If a Device is not learned = The Green and Red LEDs on the Device will flash alternate.
4) Press and hold the ‘learn’ button on the Device = The 3 LEDs start cycling around.
5) Release the ‘Learn’ button = ‘Bell Learnt’ will be displayed and confirmation tone on the panel will
be emitted.
If a Bell has already been learnt, ‘Bell learnt already’ will be displayed.
LEARN
>5s
LEARN
>5s
To Next Page
Loading...
Need help?
General
