Q-Mac HF-90 - Page 46

HF-90 Operation & Installation Guide
CHAN
Send Beacon Request (DTMF keypad)
Initiate Selcall Scan
(DTMF keypad)
(front panel keypad)
Press down or to select Scan.
Programming the Selcall ID Number (front
panel keypad / DTMF keypad)
The above instruction only applies to the
Australian Version (or the International Version which has
not been set up for Field Programming).
CHAN
CHAN
4 digit Selcall ID
CLAR
CLAR
4 digit Selcall ID
43
Section 6.6