• The QER and QRT-1 (Deluxe, Max, Standard). QRT 350e, QRT550e, Q-5000 & M-Series 4-Point Wheelchair Securement
Systems and components comply with all requirements of safety regulations and standard ISO10542-1:2012 and PAS2012, as
applicable.
• AL600 Series Retractors, M-Series, Q-5000 Series, QRT-1 Series, QRT 350e and QRT 550e, comply with all requirements of
safety regulations UN ECE Regulation 107, as applicable.
• QRT-1 (used with either QRT1 or QER as front tiedown), Q-5000 & M-Series Systems are dynamically crash tested at 30mph
(48kph), 20g, using a 85kg forward facing surrogate wheelchair and a 78 KG Anthropomorphic Test Device (ATD). The ATD is
restrained by both shoulder and pelvic belt restraints.
• QRT350e used with either QRT1 or QER (as front tiedown), are dynamically crash tested at 30mph (48kph), 20g, using both a
85kg and 150Kg forward facing surrogate wheelchair and a 78 KG Anthropomorphic Test Device (ATD). The ATD is restrained
by both shoulder and pelvic belt restraints.
• QRT550e used with either QRT1 or QER (as the front tiedown), are dynamically crash tested at 30mph (48kph), 20g, using
both a 85kg and 200 Kg forward facing surrogate wheelchair and a 78 KG Anthropomorphic Test Device (ATD). The ATD is
restrained by both shoulder and pelvic belt restraints.
COMPLIANCE
To Next Page
Loading...
