Qlogic SANbox 5600 Series

A – Command Line Interface
Show Command
A-106 59097-02 B
S
The following is an example of the Show Version command:
SANbox xxxx #> show version
*****************************************************
* *
* Command Line Interface SHell (CLISH) *
* *
*****************************************************
SystemDescription SANbox 5600 Series FC Switch
Eth0NetworkAddress 10.20.11.192 (use 'set setup system' to update)
MACAddress 00:c0:dd:00:71:ee
WorldWideName 10:00:00:c0:dd:00:71:ed
ChassisSerialNumber FAM033100024
SymbolicName SANbox xxxx
ActiveSWVersion V5.0.x.x.xx.xx
ActiveTimestamp day month date time year
DiagnosticsStatus Passed
LicensedPorts 20