3 – Managing Fabrics
RADIUS Servers
3-4 59097-02 B
S
3.1.2
Removing a RADIUS Server
When you remove a RADIUS server, you disable the management of
authentication usernames and passwords over the network for that server.
Figure 3-2. Remove Server
To remove a RADIUS server, do the following:
1. Open the faceplate display, open the Switch menu, and select Radius
Servers....
2. In the Radius Server Information dialog, shown in Figure 3-2, click the
Remove Server tab.
3. In server list at the top of the dialog, select the server to be removed.
4. Click the Remove Server button to remove the server, and click the Close
button to exit the dialog.
To Next Page
Loading...
