A – Command Line Interface
Show Config Command
A-110 59097-02 B
S
The following is an example of the Show Config Threshold command:
SANbox xxxx #> show config threshold
Configuration Name: default
------------
Threshold Configuration Information
-----------------------------------
ThresholdMonitoringEnabled False
CRCErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 1
SampleWindow 10
DecodeErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 0
SampleWindow 10
ISLMonitoringEnabled True
RisingTrigger 2
FallingTrigger 0
SampleWindow 10
LoginMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LogoutMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LOSMonitoringEnabled True
RisingTrigger 100
FallingTrigger 5
SampleWindow 10
The following is an example of the Show Config Zoning command:
SANbox xxxx #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
InteropAutoSave True
DefaultVisibility All
DiscardInactive False
To Next Page
Loading...
Need help?
General
