A – Command Line Interface
User Command
A-128 59097-02 B
S
Notes Authority level or password changes that you make to an account that is currently
logged in do not take effect until that account logs in again.
Examples The following is an example of the User Accounts command:
SANbox xxxx (admin) #> user accounts
Current list of user accounts
-----------------------------
images (admin authority = False, never expires)
admin (admin authority = True , never expires)
chuckca (admin authority = False, expires in < 50 days)
gregj (admin authority = True , expires in < 100 days)
fred (admin authority = True , never expires)
The following is an example of the User Add command:
SANbox xxxx (admin) #> user add
Press 'q' and the ENTER key to abort this command.
account name (1-15 chars) : user1
account password (8-20 chars) : *******
please confirm account password: *******
set account expiration in days (0-2000, 0=never): [0] 100
should this account have admin authority? (y/n): [n] y
OK to add user account 'user1' with admin authority
and to expire in 100 days?
Please confirm (y/n): [n] y
The following is an example of the User Edit command:
SB211.192 (admin) #> user edit
Press 'q' and the ENTER key to abort this command.
account name (1-15 chars) : user1
set account expiration in days (0-2000, 0=never): [0]
should this account have admin authority? (y/n): [n]
OK to modify user account 'user1' with no admin authority
and to expire in 0 days?
Please confirm (y/n): [n]
To Next Page
Loading...
Need help?
General
