TL-R1220Sep-RP
TL-R1620Sep-RP
4. Power on the JBOD enclosures.
5. Power on the NAS.
6. Verify that the JBOD enclosures are recognized by the NAS.
a. Log on to QTS as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > Storage .
c. Verify that the JBOD enclosures are listed.
Note
The NAS may take up to 30 seconds to detect the JBOD enclosure and the installed drives.
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide
Hardware Installation 17
To Next Page
Loading...
Need help?
General
