QNAP TL-R1220Sep-RP - Hardware Installation; Installing Drives; Installing 3.5-Inch Hard Drives on 3.5-Inch Trays

3. Hardware Installation
This section provides information on installing drives, connecting the JBOD enclosure to a NAS or a server,
network configurations, and hot-swapping redundant power supply units.
Installing Drives
QNAP JBOD enclosures are compatible with 3.5-inch hard drives, 2.5-inch hard drives, and 2.5-inch solid-
state drives.
Installing 3.5-inch Hard Drives on 3.5-inch Trays
Warning
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the JBOD enclosure.
2. Remove the drive tray.
a. Pull the handle to release the tray.
b. Pull the tray out.
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide
Hardware Installation 12