Network Configuration for Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) is a fault-tolerance technique where several physical ports are
combined together to form a single channel. Using link aggregation provides fast and transparent recovery if
one port fails as all I/O traffic continues to operate until all physical ports fail. Deploying link aggregation
achieves better network performance.
The following diagrams are examples of how the multipath I/O should be implemented:
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide
Hardware Installation 21
To Next Page
Loading...
