2. Power on the RAID enclosures.
3. Verify that the RAID enclosures are recognized by the computer.
a. Go to your computer's disk management utility or open QNAP External RAID Manager in
Windows or macOS.
b. Verify that the RAID enclosures are listed.
Attaching the USB Cable Clip
Important
The USB cable clip keeps the cable near the enclosure to avoid potential damage to the
cable or any nearby components.
The clip is not intended to be removed after attaching it to the RAID enclosure.
1. Insert the cable clip into the cable clip slot.
QNAP External RAID Enclosure User Guide
Hardware Installation 21
To Next Page
Loading...
