QNAP TS-1677X Series - Page 6

Component TS-1677X
Pre-installed memory • 4 GB RAM: 1 x 4 GB DDR4
• 8 GB RAM: 2 x 4 GB DDR4
• 16 GB RAM: 2 x 8 GB DDR4
• 64 GB RAM: 4 x 16 GB DDR4
Use only QNAP memory modules to maintain system performance and stability.
For NAS devices with more than one memory slot, use QNAP modules with
identical specifications.
Important
Using unsupported modules may degrade performance,
cause errors, or prevent the operating system from starting.
Total memory slots 4 x Long-DIMM DDR4
Important
For dual- or quad-DIMM configurations, you must use a pair of
identical DDR4 modules.
Maximum memory 64 GB: 4 x 16 GB
Storage
Drive bays • 12 x 3.5-inch SATA 6 Gbps bays
• 4 x 2.5-inch SATA 6 Gbps bays
Drive compatibility • 3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid state drives
• 2.5-inch bays:
• 2.5-inch SATA solid state drives
Network
10 Gigabit Ethernet ports 2 x 10GBASE-T RJ45
Note
These ports support 10GbE, 5GbE, 2.5GbE, 1GbE, and 100M
networking.
Tip
You can purchase additional CAT 6A or CAT 7 LAN cables to
attain 10GbE connectivity.
Gigabit Ethernet ports 4 x RJ45
External I/O Ports & Expansion Slots
PCIe slots • 1 x PCIe 3.0 x8
• 1 x PCIe 3.0 x4
• 1 x PCIe 2.0 x4
TS-1677X User Guide
Product Overview 5