EasyManua.ls Logo

QNAP TS-410E-8G - Installation Requirements

QNAP TS-410E-8G
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Battery
This product contains a button battery.
If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours.
Keep batteries out of reach of children.
If you think batteries may have been swallowed or placed inside any part of the body, seek immediate
medical attention.
To avoid potential battery explosion, causing injury or damage to components, ensure that you replace
the existing battery with a battery of the same type.
Dispose of used batteries properly according to local regulations or the instructions of the battery
manufacturer.
Moving Parts
Moving fan blades: Keep your body parts away from moving fan blades while the device is connected
to a power source.
Moving components: Keep your body parts away from other moving components.
The device is not suitable for use in locations where children are likely to be present.
Installation Requirements
Category Item
Environment Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
Non-condensing relative humidity: 5% to 95%
Wet-bulb temperature: 27˚C (80.6˚F)
Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
Hardware and peripherals Computer or NAS
Storage drives
For the list of compatible drive models, go to https://
www.qnap.com/compatibility.
Network cable
Tools Phillips #1 or #2 screwdriver
Flat head screwdriver
Anti-static wrist strap
TS-410E User Guide
Product Overview 9

Related product manuals