QNAP TS-433-4G User Manual

c. Lock the tray.
5. Power on the NAS.
Connecting USB Expansion Units
Note
• To connect USB expansion units to TS-433, a USB Type-A to USB Type-C cable is
required.
• You can purchase storage expansion accessories from QNAP or an authorized reseller.
• For details, go to https://shop.qnap.com/.
TS-433 User Guide
Installation and Conguration 18

QNAP TS-433-4G Specifications

General

Memory	4 GB DDR4 (non-expandable)
Drive Bays	4
Flash Memory	4GB eMMC
Hot-swappable	Yes
M.2 SSD Slot	No
Form Factor	Tower
Drive Compatibility	3.5" SATA HDD, 2.5" SATA HDD/SSD
HDMI Output	No
Maximum Internal Raw Capacity	80 TB (20 TB drive x 4)
Operating System	QTS
Fan	1 x 120mm
USB Ports	2 x USB 3.2 Gen 1