QNAP TS-433-4G User Manual

Component TS-433
System battery CR2032 lithium battery (3V, 220 mAh)
Warning
To avoid potential battery explosion, causing injury or
damage to components, ensure that you replace the
existing battery with a battery of the same type.
Important
Dispose of used batteries according to local regulations
or the instructions of the battery manufacturer.
Fans System: 1 x 120 mm, 12V DC fan
Warning
To avoid potential injury or damage to components,
do not touch the fans while the NAS is connected to a
power source.
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Relative humidity • Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
Tip
Model specications are subject to change without prior notice. To see the latest
specications, go to https://www.qnap.com.
Package Contents
Item Quantity
TS-433 1
AC power adapter 1
Power cord 1
Screws for 3.5-inch drives TS-433: 12
Screws for 2.5-inch drives TS-433: 12
Ethernet cable 1 x CAT5e
Quick Installation Guide (QIG) 1
Drive tray keys 2
Components
TS-433 User Guide
Product Overview 6

QNAP TS-433-4G Specifications

General

Memory	4 GB DDR4 (non-expandable)
Drive Bays	4
Flash Memory	4GB eMMC
Hot-swappable	Yes
M.2 SSD Slot	No
Form Factor	Tower
Drive Compatibility	3.5" SATA HDD, 2.5" SATA HDD/SSD
HDMI Output	No
Maximum Internal Raw Capacity	80 TB (20 TB drive x 4)
Operating System	QTS
Fan	1 x 120mm
USB Ports	2 x USB 3.2 Gen 1