2. Product Overview
This chapter provides basic information about the QNAP device.
About TS-433
The TS-433 is a user-friendly lightweight NAS designed for backup, synchronization, remote access, and
home entertainment. Its ARM Cortex-A55 4-core processor and 4 GB memory provide smooth and seamless
data transmission for multiple users. With a sleek and simple tower design, the TS-433 is an ideal NAS for
homes and small oces.
Hardware Specications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third
party invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N Pre-installed memory
TS-433-4G 4 GB RAM (non-expandable)
Component TS-433
Processor
CPU ARM Cortex-A55 4-core
Frequency 2.0 GHz
Architecture ARM 64-bit
Encryption engine AES-256
Memory
Pre-installed memory 4 GB RAM (non-expandable)
Note
The TS-433 reserves some RAM for shared graphics
memory.
Maximum memory 4 GB RAM (non-expandable)
Flash memory 4 GB (dual-boot OS protection)
Storage
Drive bays 4 x 3.5-inch SATA 6 Gbps
Tip
The drive bays are backward compatible with SATA 3
Gbps drives.
TS-433 User Guide
Product Overview 4
To Next Page
Loading...
Need help?
General
