QNAP TS-433-4G User Manual

Component TS-433
Drive compatibility 3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
Hot-swapping 3.5-inch drive bays: 1-4
Network
Gigabit network interface 1 x GbE RJ45
Note
The Gigabit Ethernet port supports the following
network connectivity speeds: 1 GbE, 100 Mb, and 10
Mb.
2.5 Gigabit network interface 1 x 2.5 GbE RJ45
Note
The 2.5 Gigabit Ethernet port supports the following
network connectivity speeds: 2.5 GbE, 1 GbE, 100 Mb,
and 10 Mb.
Wake-on-LAN • GbE RJ45
• 2.5GbE RJ45
External I/O Ports & Expansion Slots
USB ports Back:
• 2 x USB 2.0 Type-A
Front:
• 1 x USB 3.2 Gen 1 Type-A
Interface
Buttons • Power
• Reset
• USB One Touch Copy
Dimensions
Form factor Tower
Dimensions (H x W x D) 169 x 160 x 219 mm
(6.65 x 6.29 x 8.62 in)
Net weight 2.07 kg (4.56 lbs)
Others
Power supply unit External 90W Adapter, 100-240V AC, 50/60 Hz
Warning
To reduce the risk of re or electric shock, ensure
that you only connect the power cord to a properly
grounded electrical outlet.
TS-433 User Guide
Product Overview 5

QNAP TS-433-4G Specifications

General

Memory	4 GB DDR4 (non-expandable)
Drive Bays	4
Flash Memory	4GB eMMC
Hot-swappable	Yes
M.2 SSD Slot	No
Form Factor	Tower
Drive Compatibility	3.5" SATA HDD, 2.5" SATA HDD/SSD
HDMI Output	No
Maximum Internal Raw Capacity	80 TB (20 TB drive x 4)
Operating System	QTS
Fan	1 x 120mm
USB Ports	2 x USB 3.2 Gen 1