3. Power on the expansion units.
4. Verify that the expansion units are recognized by the device.
a. Log on to QTS as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.
Connecting SATA JBOD Expansion Units
To connect the device to a SATA JBOD expansion unit, a host bus adapter must be installed on the NAS. For
required accessories details, see Expansion unit installation.
1. Power o the NAS.
TS-855eU User Guide
Installation and Conguration 36
To Next Page
Loading...
