For details, see the following topics:
• Installing 3.5-inch Hard Drives on 3.5-inch Trays
• Installing 2.5-inch Hard Drives or Solid-State Drives on 3.5-inch Trays
• Installing Solid-State Drives on Solid-State Drive Trays
3. Optional: Replace the memory modules.
For details, see Replacing Memory Modules
4. Optional: Connect the expansion units.
For details, see Expansion Unit Installation
5. Connect the power cord and all applicable cables.
6. Power on the NAS.
7. Install QTS.
For details, see QTS Installation.
8. Log on to QTS.
TS-932PX User Guide
Product Overview 10
To Next Page
Loading...
