QNAP TS-932PX User Manual

Reset Button
Operation User Action Result
Basic system reset Press and hold the button for 3
seconds.
The following settings are reset to
default:
• System administrator
password: The default
password is the first MAC
address in uppercase letters
without special characters. For
example, if the first MAC
address is 00-08-9B-F6-15-75,
then the admin password will
be 00089BF61575.
Tip
You can find the first
MAC address using
Qfinder Pro. A label
attached to the device
also lists the address as
MAC1.
• TCP/IP configuration:
• Obtain IP address
settings automatically via
DHCP
• Disable jumbo frames
• If port trunking is enabled
(multi-LAN models only),
the port trunking mode is
reset to “Active Backup
(Failover)”.
• System port: 8080 (system
service port)
• Security level: Low (Allow all
connections)
• LCD panel password: (blank)
• VLAN: Disabled
Advanced system reset Press and hold the button for 15
seconds.
The default factory settings are
restored.
• To retrieve old data after an
advanced system reset,
recreate the previous folder
structure on the NAS.
TS-932PX User Guide
Basic Operations 31

QNAP TS-932PX Specifications

General

RAID levels	0, 1, 5, 6, 10, 50, 60, JBOD
Hot-swap drive bays	Yes
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, NTFS, ext3, ext4
Storage drive interface	-
Storage drives installed	No
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	9
Supported storage drive interfaces	Serial ATA, Serial ATA II, Serial ATA III
Processor cores	4
Processor model	Alpine AL-324
Processor frequency	1.7 GHz
Processor architecture	ARM Cortex-A57
Processor manufacturer	Annapurna Labs
Flash memory	512 MB
Memory slots	1
Internal memory	4 GB
Memory form factor	SO-DIMM
Internal memory type	DDR4
Maximum RAM supported	16 GB
Ethernet LAN data rates	100, 1000, 2500, 10000 Mbit/s
Supported network protocols	FTP, SFTP, TFTP, ec, OpenVPN, QBelt
Ethernet LAN data rate supported (max)	10000 Mbit/s
Fiber optic connector	SFP+
Concurrent connections	700
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
Chassis type	Tower
Cooling type	Active
Fan diameter	140 mm
Product color	Black
LED indicators	HDD, LAN, SSD, Status, USB
Number of fans	1 fan(s)
Cable lock slot type	Kensington
Type	NAS
Noise level	18.6 dB
Device class	Small & Medium Business
Share folder	CIFS/SMB
Backup features	Cloud, iSCSI LUN
Browser supported	Apple Safari 7+, Google Chrome, Microsoft Internet Explorer 10+, Mozilla Firefox
Security algorithms	256-bit AES, FIPS 140-2, HTTPS, SNMPv2, SNMPv3, SSH, SSL/TLS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Fan voltage	12 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply location	External
Power supply unit (PSU) capacity	120 W
Operating system version	5.0.0
Operating system installed	QNAP Turbo System
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	224.1 mm
Width	224.6 mm
Height	182.7 mm
Weight	3390 g