QNAP TS-932PX - Page 6

Component TS-932PX
Memory slots 1 x DDR4 SODIMM
Important
• Use only QNAP memory modules to maintain
system performance and stability. For NAS devices
with more than one memory slot, use QNAP
modules with identical specifications.
• Using unsupported modules may degrade
performance, cause errors, or prevent the
operating system from starting.
Maximum memory 16 GB RAM: 1 x 16 GB
Flash memory 512 MB (dual-boot OS protection)
Storage
Drive bays • 5 x 3.5-inch SATA 6 Gbps
• 4 x 2.5-inch SATA 6 Gbps
Drive compatibility 3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
2.5-inch bays:
• 2.5-inch solid-state drives
Hot-swapping Supported
Network
10 Gigabit Ethernet ports 2 x 10 GbE SFP+
2.5 Gigabit Ethernet ports 2 x 2.5 GbE RJ45
Important
Avoid connecting these ports to Power Sourcing
Equipment or a Power over Ethernet port as it may
cause damage to the surge protection feature.
Wake-on-LAN Yes (2.5 GbE RJ45)
External I/O Ports & Expansion Slots
USB ports Front:
1 x USB 3.2 Gen 1 Type-A
Note
This USB port supports One Touch Copy.
Rear:
2 x USB 3.2 Gen 1 Type-A
Interface
TS-932PX User Guide
Product Overview 5