QNAP TS-AI642 Repair Manual

11. Remove the rear panel.
a. Detach the system fan cables from the system board.
b. Remove the screws that secure the power supply unit to the rear panel.
Note
• The at head #6-32 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
| NAS Repair Manual
Category D NAS Models 104

QNAP TS-AI642 Specifications

General

Brand	QNAP
Model	TS-AI642
Category	Storage
Language	English