QNAP TS-AI642 Repair Manual

c. Attach the screws to secure the drive cage.
Note
• The at head M3x4 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
8. Attach the case cover.
a. Place the cover on the device.
b. Slide the cover forward.
| NAS Repair Manual
Category A NAS Models 33

QNAP TS-AI642 Specifications

General

Brand	QNAP
Model	TS-AI642
Category	Storage
Language	English