QNAP TS-h3087XU-RP - Installation and Configuration; Hardware Installation; Drive Installation

2. Installation and Conguration
This chapter provides specic hardware and rmware installation and conguration steps.
Hardware Installation
This section provides information on installing or replacing drives, memory modules, expansion cards,
redundant power supply units, system fans, rail kits, and expansion units.
Drive Installation
The TS-h3087XU-RP is compatible with 3.5-inch hard drives and 2.5-inch solid-state drives.
Installing 3.5-inch Drives on 3.5-inch Trays
For the list of compatible drive models, go to https://www.qnap.com/compatibility.
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power o the NAS.
2. Remove the drive tray.
a. Slide the lock to the left.
b. Push the button to release the tray handle.
c. Pull the tray out.
TS-h3087XU-RP User Guide
Installation and Conguration 13