7. Install a new module.
a. Align the notch with the ridge in the slot.
b. Insert the module into the slot.
c. Verify that the metal connectors are completely inserted into the slot.
d. Carefully press down on the module until the retention clips lock the module into place.
8. Attach the 2.5-inch drive bay fan duct.
a. Attach the 2.5-inch drive bay fan duct to the back of the 2.5-inch drive bay enclosure.
TS-h3087XU-RP User Guide
Installation and Conguration 24
To Next Page
Loading...
