QNAP TS-h3087XU-RP - Page 5

Component TS-h3087XU-RP
Memory slots 4 x UDIMM DDR4
Important
• Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more
than one memory slot, use QNAP modules with
identical specications.
• Using unsupported modules may degrade
performance, cause errors, or prevent the operating
system from starting.
• This device supports ECC memory modules.
Maximum memory 128 GB RAM: 4 x 32 GB
Flash memory 5 GB (dual-boot OS protection)
Storage
Drive bays • 24 x 3.5-inch SATA
• 6 x 2.5-inch SATA
Drive compatibility 2.5-inch bays:
• 2.5-inch SATA solid-state drives
3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
Tip
• For the list of compatible drive models, go to https://
www.qnap.com/compatibility.
• The drive bays are backward compatible with SATA 3
Gbps drives.
SSD cache acceleration
support
This device supports SSD cache acceleration for all drives.
Hot-swapping This device supports hot-swapping for all drives.
Network
2.5 Gigabit network interface 2 x 2.5 GbE (RJ45)
Note
The 2.5 Gigabit Ethernet RJ45 ports support the following
network connectivity speeds: 2.5 GbE, 1 GbE, 100 Mbps,
and 10 Mbps.
10 Gigabit network interface 2 x 10GBASE-T (RJ45)
Note
The 10GBASE-T RJ45 ports support the following network
connectivity speeds: 10 GbE, 5 GbE, 2.5 GbE, 1 GbE, 100
Mbps, and 10 Mbps.
TS-h3087XU-RP User Guide
Product Overview 4