QNAP TVS-882BRT3 - Product Overview; About the TVS-882 BRT3; Hardware Specifications

2. Product Overview
This chapter provides basic information about the QNAP TVS-882BRT3 NAS.
About the TVS-882BRT3
The TVS-882BRT3 is powered by 7th generation Intel
®
quad-core processors and dual-channel DDR4 RAM.
The NAS includes one 5.25-inch SATA drive bay for Blu-ray disc drive installation and four Thunderbolt™ 3
ports for high-speed data transmission. The TVS-882BRT3 also has two M.2 SSD slots for cache
acceleration and three HDMI ports for media applications.
Hardware Specifications
Important
Modifying the hardware or software of your QNAP product invalidates the warranty. QNAP
is not responsible for any damage or data loss caused by unauthorized modifications and
installation of unsupported third-party applications.
Component TVS-882BRT3
Ordering P/N • TVS-882BRT3-i5-16G
• TVS-882BRT3-ODD-i5-16G
• TVS-882BRT3-i7-32G
• TVS-882BRT3-ODD-i7-32G
Processor
CPU
Intel
®
Core™ i5-7500 quad-core
3.4 GHz, burst up to 3.8 GHz
Intel
®
Core™ i7-7700 quad-core 3.6 GHz, burst
up to 4.2 GHz
Architecture 64-bit
Graphics 9th generation Intel® HD Graphics
Memory
Pre-installed
memory
16 GB (2 x 8 GB) of DDR4 UDIMM 32 GB (4 x 8 GB) of DDR4 UDIMM
Total memory slots 4
Maximum memory 64 GB (4 x 16 GB)
Storage
Drive bays 8 x SATA 6 Gbps
Drive compatibility • 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid state drives
M.2 SSD interface
type
2 x SATA 6 Gbps
M.2 SSD
compatibility
• 2242
• 2260
• 2280
• 22110
TVS-882BRT3 User Guide
Product Overview 4