QSC LA108 - Splay Angle Adjustment for Ground Stack

30
—Figure41—
WARNING!: Make sure the loudspeakers are physically, properly aligned; if not, the latching system may not properly
engage, and the loudspeakers could separate causing physical damage, and/or personal injury.
Splay Angle Adjustment for Ground Stack
The Stack Adapter allows loudspeakers to be installed at 6°, 0°, -6°, and -12°.
+6 Degrees -6 Degrees0 Degrees -12 Degrees
—Figure42—
NOTE: See the section on “Understanding Splay Angles” for further details.
Decreasing Angle
1. Push Angle Lever on both sides all the way in, until they
make a click sound and stay depressed.
2. Lift loudspeaker up into the next angle position, until it makes
a click sound.
1.5°
6°
—Figure43—