QSC LA108 - Outdoor Installations; Rear Panel User Interface; Navigating the Rear User Interface

44
Outdoor Installations
CAUTION!:
- Do not install LA108/LA112 loudspeaker enclosures with their rear panels exposed to direct sunlight. Direct sunlight
will heat the amplifier module and reduce its ability to produce full output. Install sunshades if the application merits.
Maximum ambient temperature for full performance to specification is 50° C (122° F).
- Do not install enclosures with exposure to rain or other water sources. The enclosure is not weatherproof. Outdoor
installations must provide protection from the elements.
Rear Panel User Interface
—Figure71—
2 3 41
1. Displays Menus and Settings
2. Push to enter the Menu, or return to Home Screen from Menu
3. Rotate to adjust gain, select values, and press for enter
4. Push to ID loudspeaker in QSC SysNav
™
or Q-SYS Ecosystem
Navigating the Rear User Interface
When first unpacking LA108 or LA112 active line array loudspeakers, make sure to download the latest loudspeaker firmware as well
as the latest version of the QSC SysNav
™
(System navigator) App from QSC.com.
Menu Map
HOME
High Pass Filter
(HPF)
HF Shading
Settings
Ar-Q
™
StateEQDelay
Security LCD Brightness Factory Reset RegulatoryDiagnostic TestLED ModeSensitivityNetwork
—Figure72—