Installation Manual
4. Power on and Run Router 47
www.qtech.ru
Software mirror file name
2.4.3. View Power Module Status Information
You can use the show system power command to view the relevant information of the power
supply used on the device, including the online information of the power, status information,
the swapping times statistics of the power module, and the error times statistics during the
swapping process.
Command: router#show system power
Display as follows:
System Power Information(Power 1 - ONLINE)
----------------------------------------------------------------
Status: Normal
Description:
----------------------------------------------------------------
STATISTICS: 1 IN, 0 OUT, 0 IERR, 0 OERR
System Power Information(Power 2 - ONLINE)
----------------------------------------------------------------
Status: Normal
Description:
----------------------------------------------------------------
STATISTICS: 1 IN, 0 OUT, 0 IERR, 0 OERR
Table 4-3 Key field description of the information displayed via show system power
System Power Information(Power 2 -
ONLINE)
System power information (power
module 2, the status is online)
The swapping times of the power
module and the swapping error times
statistics, such as 1 IN, 0 IERR, 0 OUT,
0 OERR indicates that the power module
is correctly inserted once.
To Next Page
Loading...
Need help?
General
