EasyManua.ls Logo

QUAD Artera Solus Play - DOWNLOAD THE APP

QUAD Artera Solus Play
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
DOWNLOAD THE APP
The DTS Play-Fi APP can be downloaded from the Google Play Store, Amazon APP Market or Apple App Store. For Windows PC
you can download the Play-Fi Windows APP from the official website: https://play-fi.com
Network Settings
Wired network setting
Connect the Ethernet Port to the LAN port of a wireless router using a suitable cable. After switching on the Artera Solus Play, the
white Wi-Fi LED on the front panel and red Wi-Fi LED on the rear panel will flash during the intialise phase of Wi-Fi mode. the
Wi-Fi LED will slow-flash when the device goes into the wired network connection. If the connection is successful, the red Wi-Fi LED
on the rear panel will go off, but the white Wi-Fi LED on the front panel remains illuminated.
Wireless Network Setting
You can connect to a wireless network using one of two modes: WPS Mode or Standard Mode.
WPS Mode:
In order to make the Artera Solus Play enter WPS Mode, switch the unit on and press and hold the Wi-Fi SET-UP button on the rear
panel for 4 seconds. The Wi-Fi LED will double-flash and beep with a warning tone, the display shows “WPS” indicating that WPS
Mode is active. Then briefly press the WPS key on your wireless router and the unit should connect to your wireless network
automatically. This connection phase may take up to 60 seconds. If the connection fails, please try again.
Standard Mode:
After switching the Artera Solus Play on, press and hold the Wi-Fi SET-UP button on the rear panel for 8 seconds. For the first 4
seconds the Wi-Fi LED will double-flash and beep with a warning tone, the display shows “WPS”. keep holding the button down
and after 8 seconds the Wi-Fi LED will flash quickly and also beep with a warning tone, the display shows “WIFI setup” The
Standard connection mode is now active. The Wi-Fi hotspot will be found after several seconds and the display shows “Artera
WIFI”. Then the Wi-Fi LED will flash-breathe with a slow fluctuation between off and on (reflected by the white LED on the front
panel). You can now use your Android or IOS device to enter the Wi-Fi password using the Play-Fi APP as follows (see next page):
IMPORTANT
SAFETY INFORMATION
REMOTE
HANDSET
CONTROLS AND
FUNCTIONS
CONNECTIONS
SYSTEM
OPERATIONS
DTS PLAY-FI
®
WIRELESS...
MENU
OPTIONS
SPECIFICATIONS CONTENTSINTRODUCTION
WARRANTY
COVERAGE

Related product manuals