Here YYYY means year, MM means month, DD means day, W means
weekday, hh menas hour, mm means minute and ss means second.
Press [ENTER] to save and return “Image” menu or press to [ESC] abort
modification.
Copy parameters: After you setup the properties of one camera, you can
copy it’s parameter to any other camera or all cameras.
After you save the modification, you can find the modification will be
taken into effective. You can press “Cancel” button or [ESC] key to abort.
Camera Name
In “Image Setup” menu, you can define name for each camera. Please
note that camera’s name can not be copied.
The steps of camera name setup:
Step 1: Select one camera.
Step 2: Move “Active Frame” to camera name edit box, press [EDIT] key
to enter into edit status, you can input digital number, uppercase and
lowercase characters (refer to Chapter 3.4). The camera name can
support 32 characters.
To Next Page
Loading...
General