To Next PageTo Next Page
Need help?Do you have a question about the Quadra-Fire Santa Fe Pellet Insert and is the answer not in the manual?
General| Brand | Quadra-Fire |
|---|---|
| Model | Santa Fe Pellet Insert |
| Category | Indoor Fireplace |
| Language | English |
Details about the appliance's certifications and standards compliance.
Provides technical specifications for the appliance's heating output and efficiency ratings.
Specifies the type and thickness of ceramic glass used in the appliance.
Lists the electrical requirements for the appliance, including voltage, frequency, and amperage.
Outlines the conditions and requirements for installing the appliance in a mobile home.
Defines materials that do not ignite or burn, used for clearances and construction.
Defines materials that are made of or surfaced with ignitable substances.
Provides recommendations for installation in sleeping rooms, including ventilation and alarms.
Information regarding California's Proposition 65 warning for chemicals.
Guides on planning the installation, including appliance and vent termination locations.
Details requirements for supporting the appliance's weight and chimney.
Discusses optimal placement for the thermostat control unit for best performance.
Lists necessary tools and building supplies for installation.
Instructions for inspecting the appliance and its parts for damage before installation.
A checklist for installers to verify all installation steps are completed correctly.
Provides detailed measurements and diagrams of the appliance's physical size.
Details required clearances from combustible materials for safe installation according to standards.
Specifies minimum fireplace opening dimensions and floor protection needs.
Provides steps and considerations for installing the insert into a factory-built fireplace.
Details how to install the insert into a masonry fireplace.
Outlines requirements for using prefabricated metal chimneys with the appliance.
Specifies minimum clearances and locations for vent terminations.
Tips for preventing smoke and odors, including negative pressure considerations.
Explains negative pressure in homes and its impact on appliance operation.
Discusses the importance of draft for successful venting and factors affecting it.
Details how to properly connect the appliance to the chimney system.
Provides specific clearance and location requirements for vent terminations.
Explains how to calculate equivalent vent pipe length for proper sizing.
A chart to help select the correct vent pipe size based on equivalent feet and altitude.
Instructions for a horizontal venting system using a full reline with outside air.
Instructions for a vertical venting system using a full reline with outside air.
How to adjust the appliance's leveling bolts for proper installation.
Step-by-step guide for installing the optional outside air kit.
Procedures for removing and installing decorative grilles.
Instructions for safely removing and reinstalling the appliance door handle.
Steps for removing the appliance door for maintenance or cleaning.
Instructions for assembling and installing the adjustable hearth support.
Guides on installing the appliance's decorative panels and trim.
Instructions for correctly placing the optional decorative log set.
A log for recording service dates, performed by, and description of work.
Lists available accessories for the appliance with part numbers.
