Verifying the proper operation of the assembly
By positioning yourself on the side of the bike, so to property see the frame of the plow, operate the winch to lift the plow.
When the frame tube come in contact with the underside of the ATV, the articulated arm will rotate the plow up.
Stop the winch when the stopping plate (A) of the articulated arm come in contact with the top of the tube (B).
Sit on the bike, and from this position, find visual cues to remind you of the position of the plow when it is raised to the maximum.
IMPORTANT: Never exceed the maximum height.
Ignoring this warning will cause serious damage to the frame of the plow or ATV.
19
Note: Use the receiver pin (A) only if you need to install or
remove the frame of the plow from the ATV.
CAUTION : Before using or lifting the plow, remove the
receiver pin (A).
Failure to follow this step could cause serious damage
to the frame of the plow or ATV.
A
A
maximun height
contact with the underside
B
OPERATION
To Next Page
Loading...