Note:
TORQUE SPECIFICATION TABLE
Estimated with clamp load as 75% of proof load
as specified in ISO 898-1
Property
Class
8.8
10.9
12.9 Socket Head
Cap Screw
Minimum Tensile
Strength MPa
M6 - M16: 800
M20 - M30: 830
1040 1220
Nominal Size
and
Thread Pitch
Bolt Torque Specs in Foot Pounds or (Inch Pounds)
Dry Lubed Dry Lubed Dry Lubed
M5 x 0.80 (54) (41) (78) (59) (91) (68)
M6 x 1.00 (92) (69) (133) (99) (156) (116)
M7 x 1.00 (156) (116) (222) (167) (260) (195)
M8 x 1.25 (225) (169) (333) (242) (377) (284)
M10 x 1.50 37 28 53 40 62 47
M12 x 1.75 65 49 93 69 108 81
M14 x 2.00 104 78 148 111 173 130
M16 x 2.00 161 121 230 172 269 202
M18 x 2.50 222 167 318 238 372 279
M20 x 2.50 314 235 449 337 525 394
M22 x 2.50 428 321 613 460 716 537
M24 x 3.00 543 407 776 582 908 681
M27 x 3.00 796 597 1139 854 1331 998
M30 x 3.50 1079 809 1543 1158 1804 1353
M33 x 3.50 1468 1101 2101 1576 2455 1842
M36 x 4.00 1886 1415 2699 2024 3154 2366
However, it is the user's responsibility to verify that the provided information is correct before using it.
On our website you can discover more about snow plows.
To Previous Page
Loading...