Quanmax QBOX-1010 - Power Menu

Chapter 3
31
QBOX-1010 User’s Manual
DRAM Frequency [Auto]
Options: Auto, 400 MHz, 533MHz
Internal Graphics Mode Select [Enabled 8MB]
Select the amount of system memory used by the Internal graphics device.
Options: Enabled 1MB, Enabled 8MB
DVMT Mode Select [DVMT Mode]
Options: Fixed Mode, DVMT Mode, Combo Mode
DVMT/FIXED Memory [128MB]
Options: 64MB, 128MB, Maximum DVMT
 Power Menu
Table 11 Power Menu
BIOS SETUP UTILITY
Main Advanced Boot Chipset Power Security Exit
Power Management Setting
ACPI Function [Enabled]
Suspend mode [S3 (STR)]
Repost Video on S3 Resume [No]
Suspend Time Out [Disabled]
Restore on AC Power Loss [Power Off]
Resume By USB Device [Disabled]
Resume By PCI-E Device [Disabled]
Resume On RTC Alarm [Disabled]
Select the ACPI state used for
System Suspend
<> Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
ACPI Function [Enabled]
Enable/ Disable ACPI support for Operating System.
ENABLE: If OS supports ACPI, DISABLE: IF OS Does not support ACPI.
Suspend mode [S3 (STR)]
Options: S1 (POS), S3 (STR)
Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS post on S3/STR resume.
Options: No, Yes
Suspend Time Out [Disabled]
Options: Disabled, 1 Min, 2 Min, 4 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min, 50
Min, 60 Min
Restore On AC Power Loss [Power Off]
Options: Power Off, Power On, Last State
Resume By USB Device [Disabled]
Options: Disabled, Enabled
Resume By PCI-E Device [Disabled]