Drive Operating Conditions 5-9
When tape is loaded.
DLTtype = DLT
TM
4000 (4000DLT), or DLT
TM
7000
(7000DLT).
Compressed if compression mode enabled or
Standard if compression mode disabled.
20/40GB = DLT
TM
4000, 35/70GB = DLT
TM
7000.
This is the normal “Ready Screen”.
If write-protected tape is
inserted
During loading of a write-protected tape, the display
will change from:
“Loading>>>” to “Write Protected Tape Inside
Drive”, the LCD backlight will toggle on/off and an
audible alarm will sound.
Write-protected tape fully
loaded.
WPT = Write Protected Tape in unit.
WPT will toggle to GB and back to WPT and
continue toggling until next drive action.
Table 5-4 Drive Operation LCD Messages
To Next Page
Loading...
