High Humidity 6-7
High Humidity
To minimize the chance of condensation, please observe the
following guidelines:
• If you expose cartridges to temperatures outside the
operating limits (5-40°C/40-113°F), stabilize them before
you use them. To do this, leave the cartridges in the
operating temperature for a minimum of two hours.
• Avoid temperature problems by ensuring that the
ventilator slots at the front of the drive and the grille on
the bottom of the chassis are not obstructed so that the
drive has adequate ventilation
• Position the drive where the temperature is relatively
stable, for example, away from open windows, fan
heaters, and doors.
• Avoid leaving cartridges in severe temperature
conditions, for example, in a car standing in bright
sunlight.
• Avoid transferring data (reading from and writing to
cartridges) when the temperature is changing by more
than 10°C per hour.
To Next Page
Loading...
Need help?
General