Unpacking the Upgrade Components
Quantum DXi4700 Capacity Upgrade Guide 10
To unpack the upgrade components, refer to the following sections:
l Unpacking the Additional Node Components below
l Unpacking the DXi4700 Expansion Module on the next page
Note: Make sure to retain all packing materials, as well as the documentation and other items included
in the shipping box. The packaging materials must be used if the system is relocated.
WARNING: The DXi4700 G1 Node and Expansion module (JBOD) weigh 61.0 pounds (27.7 kg) and
62.6 pounds (28.4 kg) respectively. The DXi4700 G2 Node and Expansion module (JBOD) weigh 49.4
pounds (22.4 kg) and 59.2 pounds (26.8 kg) respectively. A minimum of two people are required to lift
either chassis.
Unpacking the Additional Node Components
Depending on the upgrade, additional Node components may ship in separate boxes (see Capacity
Upgrade Overview on page 7):
l Node hard drives (4 TB each) (6)
l Memory modules (4 GB DIMMs) (8 or 16)
l H810 RAID controller card (DXi4700 G1) (1)
l H830 RAID controller card (DXi4700 G2) (1)
Carefully unpack and remove the components from the packing materials (see Figure 4 below).
Figure 4: Unpacking the Additional DXi4700 Node Components
H810 RAID Controller (DXi4700 G1) H810 RAID Controller (DXi4700 G1)
X520 10 GbE Card 4 TB Hard Drives
To Next Page
Loading...
Need help?
General