Installing the Storage Capacity License
Quantum DXi4700 Capacity Upgrade Guide 46
Installing the Storage Capacity License
Before the newly installed hardware capacity can be used to store data, you must add a license key to
enable the new usable capacity of the system. The 6TB, 8TB, and 18TB licenses each need to be installed
separately.
Locate the Storage Capacity License Certificate that was included with the upgrade components, and then
complete the following procedure:
1. Open two Web browser windows on a computer with Internet access.
Note: During this procedure, you can copy and paste required numbers between these two
windows.
a. In one browser, navigate to the Utilities > License Keys page in the DXi remote management
console (see Figure 39 below). Note that the system serial number displays directly above the New
Key box.
For information about accessing the remote management console, see the DXi4700 User’s Guide.
Figure 39: License Keys Page
b. In the other browser, enter the address for the License Key Management Web site (see Figure
40 on the next page):
http://www.quantum.com/licensekeys
To Next Page
Loading...
