Installing Components in the Node
Quantum DXi4700 Capacity Upgrade Guide 20
WARNING: The DXi4700 G1 Node and Expansion module (JBOD) weigh 61.0 pounds (27.7 kg)
and 62.6 pounds (28.4 kg) respectively. The DXi4700 G2 Node and Expansion module (JBOD)
weigh 49.4 pounds (22.4 kg) and 59.2 pounds (26.8 kg) respectively. A minimum of two people are
required to lift either chassis.
7. Press and hold the power button on the front of the Node for three seconds to fully drain the system of
stored power prior to removing the cover (see Figure 12 below).
Figure 12: Node Power Button
1. Power Button
8. On the Node cover, rotate the latch release lock counterclockwise to the unlocked position (see Figure
13 on the next page).
To Next Page
Loading...
Need help?
General