Initial Configuration 35
DXi6701/DXi6702
Figure 23 Getting Started
Wizard: Confirm
14 Review the settings you selected to make sure they are correct. If necessary, click
Previous to return to a previous step to make changes
15 After you have confirmed all settings, click Finish.
A message appears stating that completing the setup will restart the system.
16 Click Yes to restart the system.
17 Disconnect the computer from the DXi6701/DXi6702. Reset the computer network
settings back to its default values.
18 Wait for the system to fully restart. This can take up to 30 minutes.
Continue with the next section to create a typical backup configuration.