34 Initial Configuration
DXi6701/DXi6702 Installation and Configuration Guide
10 If necessary, select Manual Date & Time Settings to manually set the system date
and time.
Specify the New System Date by clicking Calendar. Specify the New System Time
using the drop-down boxes.
Note: You can also choose to synchronize the system time with an NTP time
server. To select a timeserver pool, you must have specified at least one DNS
IP address in step 5d above. Otherwise, you must specify the IP address of
the timeserver pool. For more information, see the
Quantum DXi6000
User’s Guide
(6-67199).
11 In the Timezone drop-down box, select the time zone where the DXi6701/DXi6702
is located.
12 Next to Time Format, select the format to use when displaying times (24 hours or
12 hours).
13 Click Next to continue.
The Confirm page displays (see Figure 23).
To Next Page
Loading...
