In addition to the "IMPORTANT SAFETY INSTRUCTIONS" on the previous page please note the
following:
Important Notes
Connecting to the Mains:
- Do not connect the unit to a socket which is already feeding other units that can cause
interference (for instance electric motors, light controls, fridges etc.)
- The heat generated by the mains adaptor is completely normal.
- Whenever you intend to connect the Sirius to other units, first turn off all units. This will prevent
possible malfunctions and damage to speakers and other equipment.
Installation:
- Using the unit close to heavy power sources (or other units containing larger mains transformers)
can cause "humming" or other electrical interference.
- The unit might cause disturbances to television and radio. Do not set up your unit near any of
these receivers.
- Do not expose the unit to extreme temperatures (like for instance direct sun light in a closed
vehicle or extreme frost in winter). The unit could be damaged or the varnish on the casing might
disintegrate.
Maintenance:
- To clean the unit wipe it with a soft, dry or damp cloth. To remove persistent stains you can use a
damp cloth and a neutral cleaning agent. Wipe the unit dry afterwards.
- Never use Petrol, Thinner, Alcohol or similar cleaning agents to clean your unit. These can
dissolve the markings and varnish and might deface the casing.
Repairs and Data:
- Please remember that you might lose the memory of your unit when you send it in for repair.
Important information should therefore be stored on a different MIDI-unit (for instance
Sequencer). Although every care is taken when repairing your unit it can happen, especially when
work to the storage/memory or affiliated groups is necessary, that information is lost. Please note
that it is not possible for us to restore lost data.
5
Important Notes
See page 52
To Next Page
Loading...